CMPS10 - Tilt Compensated Magnetic Compass
Item No. : SS0500301
Item No. : SS0500301
Harga: 900.000
Our 2nd generation tilt compensated compass, now better than ever with higher accuracy and lower price.
100% compatible with CMPS09 and works with all CMPS09 Examples.
1. Descriptions :The CMPS10 module is a tilt compensated compass. Employing a 3-axis magnetometer and a 3-axis accelerometer and a powerful 16-bit processor, the CMPS10 has been designed to remove the errors caused by tilting of the PCB. The CMPS10 produces a result of 0-3599 representing 0-359.9 or 0 to 255. The output of the three sensors measuring x, y and z components of the magnetic field, together with the pitch and roll are used to calculate the bearing, each of these components are also made available in there raw form. We have also written examples of using the CMPS10 module with a wide range of popular controllers. The CMPS10 module requires a power supply at 3.3 - 5v and draws a nominal 25mA of current. There are three ways of getting the bearing from the module. A serial interface, an I2C interface or a PWM output.
2. Specifications :Voltage - 3.3v-5v only required
Current - 25mA Typ.
Resolution - 0.1 Degree
Accuracy - Horizontal, typically 0.5%
Accuracy - Tilted to +/- 60 degrees, typically 1%
Output 1 - I2C Interface, SMBUS compatible, 0-255 and 0-3599 , 100khz
Output 2 - Serial port, 9600 baud, no parity, 2 stop bits and 3.3v-5v signal levels
Output 3 - Timing Pulse 1mS to 37mS in 0.1mS increments
Small Size - 24mm x 18mm
Our 2nd generation tilt compensated compass, now better than ever with higher accuracy and lower price.
100% compatible with CMPS09 and works with all CMPS09 Examples.
1. Descriptions :The CMPS10 module is a tilt compensated compass. Employing a 3-axis magnetometer and a 3-axis accelerometer and a powerful 16-bit processor, the CMPS10 has been designed to remove the errors caused by tilting of the PCB. The CMPS10 produces a result of 0-3599 representing 0-359.9 or 0 to 255. The output of the three sensors measuring x, y and z components of the magnetic field, together with the pitch and roll are used to calculate the bearing, each of these components are also made available in there raw form. We have also written examples of using the CMPS10 module with a wide range of popular controllers. The CMPS10 module requires a power supply at 3.3 - 5v and draws a nominal 25mA of current. There are three ways of getting the bearing from the module. A serial interface, an I2C interface or a PWM output.
2. Specifications :Voltage - 3.3v-5v only required
Current - 25mA Typ.
Resolution - 0.1 Degree
Accuracy - Horizontal, typically 0.5%
Accuracy - Tilted to +/- 60 degrees, typically 1%
Output 1 - I2C Interface, SMBUS compatible, 0-255 and 0-3599 , 100khz
Output 2 - Serial port, 9600 baud, no parity, 2 stop bits and 3.3v-5v signal levels
Output 3 - Timing Pulse 1mS to 37mS in 0.1mS increments
Small Size - 24mm x 18mm
3. Additional Informations :
Full Technical Data, and the Compass FAQ
Full Technical Data, and the Compass FAQ
