Hamamatsu Flame Sensor UVTRON R9454


Hamamatsu Flame Sensor UVTRON R9454
Harga: 900.000


Versi terbaru dari Sensor Api UVTRON
Memiliki ketahanan terhadap getaran 10x lebih besar dibanding versi R26868. (10.000 m/s2)
Spesifikasi:
- Spectral Response: 185 to 260 nm
- Window material: UV Glass
- Weight: 2.5g
- Peak current: 30mA

UVTron Driver

UVTron Driver                          Harga: 750.000                                                datasheet

Driver untuk sensor api UVTron tipe low voltage, misalnya R2868.
Spesifikasi:
- Input voltage = 5 Vdc ± 5%.
- UVTron voltage output = 350 VDC.
- Quenching time = approx. 50 ms.
- Current Consumption = 300 uA.
- Output open collector (50V, 100 mA max) dan pulse (inverting & non inverting) width = 10ms.

UVTron Flame Sensor

UVTron Flame Sensor                  Harga: 750.000                                           datasheet

Sensor api UVTron R2868 yang dapat mendeteksi nyala api rokok dalam jarak 5 m.
Spesifikasi:
- Spectral Response = 185 ~ 260 nm.
- Window material = UV glass.
- Operating Voltage = 325 ± 25 VDC.
- Background = 10 cpm Max.
- Sensitivity = 5000 cpm Typ.

UVTron Flame Detector Package

UVTron Flame Detector Package                    Harga: 1.300.000                            

Paket detektor api yang di dalamnya berisi R2868 sebagai sensor apinya dan C3704 sebagai drivernya.
Spesifikasi Teknis (C3704):
- Input Voltage = 10 - 30Vdc
- Current Consumption = 3mA
- Output Signal = Open Collector (50V, 100 mA max), Pulse (Inverting and non inverting) width = 10ms.
Spesifikasi teknis (R2868):
- Spectral Response = 185 ~ 260 nm
- Window material = UV glass
- Operating Voltage = 325 ± 25 VDC
- Background = 10 cpm Max
- Sensitivity = 5000 cpm Typ

UVTron Driver Hamamatsu C10807

UVTron Driver Hamamatsu C10807        Harga: 750.000                                         datasheet

Modul driver untuk sensor UV TRON C3704
Spesifikasi :
- Catu daya : 12 - 24VDC
- Arus 4mA
- Terintegrasi dengan High Voltage DC-DC Converter
- Tengan output untuk sensor UV TRON : 350V
- Memiliki output pulsa data digital dengan konfigurasi open collector

ULTRASONIC SHOW BOARD - PASANGAN RF04

ULTRASONIC SHOW BOARD - PASANGAN RF04 (DAPATKAN SATU PAKET DENGAN UTRASONIC RF04)- 275.000


ULTRASONIC SHOW BOARD - PASANGAN RF04 (DAPATKAN SATU PAKET DENGAN UTRASONIC RF04)- 

Harga: 275.000

 

 

 

 DENGAN TRASONIC SHOW BOARD DATA JARAK BISA LANGSUNG DITAMPILKAN. Features: RRF4 ultrasonic display module using microcontroller with an external serial download side, the two switch outputs, three key choices, two IO port expansion, but also special connection DS18B20 left side (for temperature compensation). Measuring range 0-500cm

 

ULTRASONIC SHOW BOARD - PASANGAN RF04 (DAPATKAN SATU PAKET DENGAN UTRASONIC RF04)- 275.000

SENSOR ULTRASONIC MURAH RF04

SENSOR ULTRASONIC MURAH RF04 FROM CHINA UJI COBA JARAK 5 Meter Bisa- Harga 275.000


SENSOR ULTRASONIC MURAH RF04 FROM CHINA UJI COBA JARAK 5 Meter Bisa- 

Harga 275.000

 
*Supply voltage 5 v *Global Current Consumption 15 mA *Ultrasonic Frequency 40k Hz *Maximal Range 500 cm- *Minimal Range 3 cm *Resolution 1 cm *Trigger Pulse W idth 10 μs *Outline Dimension 43x20x15 mm, *Detecting range: 3cm-500cm *Best in 30 degree angle *Electronic brick compatible interface *5VDC power supply *Breadboard friendly *Dual transducer *Arduino library ready

CMUCam3


CMUCam3 Open Source Programmable Embedded Color Vision Platform

CMUCam3 Open Source Programmable Embedded Color Vision Platform
Item No. : SS0800201
Harga: 3.250.000

1. Descriptions :
The CMUcam3 providies a flexible and easy to use open source development environment that complements a low cost hardware platform. The CMUcam3 is an ARM7TDMI based fully programmable embedded computer vision sensor. The main processor is the NXP LPC2106 connected to an Omnivision CMOS camera sensor module. Custom C code can be developed for the CMUcam3 using a port of the GNU toolchain along with a set of open source libraries and example programs. Executables can be flashed onto the board using the serial port with no external downloading hardware required.
2. Additional Informations :
Get full Documentation, Software and Source code direct from www.cmucam.org

C3038-3620IR 1/4” Color Sensor Module With Digital Output


C3038-3620IR 1/4” Color Sensor Module With Digital Output

C3038-3620IR 1/4” Color Sensor Module With Digital Output
Item No. : SS0800101

Harga: 750.000

1. Descriptions :
The C3038 is a 1/4” color sensor module with digital output. It uses OmniVision’s CMOS image sensor OV6630. Combining CMOS technology together with an easy to use digital interface makes C3038 a low cost solution for higher quality video image application.

Lens included:
f3.6mm, F2.0 IR
FOV: 43.7 x 25.8 Degrees
Cut filter: Yes

2. Additional Informations :
(i) C3038 Specification Sheet
(ii) The C3038 camera schematic
(iii) The OV6630 datasheet

PIR Module - KC7783R



PIR Module - KC7783R

PIR Module - KC7783R
Item No. : SS0600201
Harga: 300.000

1. Descriptions :
This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm (CPS76)

2. Specifications :
- 5VDC Operation
- Standby Current 350mA
- Output Signal : TTL high level
- 3 wires cable
- 25 x 35 x18 mm
- Detection Angle : 60deg
- Detection Distance : 5 meters

3. Available Download Datasheet here : Download
4. Notes :
(i) The PIR sensor is sensitive to the temperature change and therefore to prevent from operating the module in rapid environmental temperature changes, strong shock or vibration. Don't expose to the direct sun light or headlights of automobile. Don't expose to direct wind from heater or air conditioner.
(ii) These modules are designed for indoor use. If using in outdoor, make sure to apply suitable supplemental optical filter and drop-proof, anti-dew construction
(iii) Detection range might be varied in different environmental temperature condition


TPA81 - 8x1 Thermopile Array


TPA81 - 8x1 Thermopile Array

TPA81 - 8x1 Thermopile Array
Item No. : #SS0600101
Harga; 1.250.000

1. Descriptions :
Detects a candle flame at a range 2 metres (6ft) and is unaffected by ambient light! Detect Human Body heat! Servo control for image construction!
The TPA81 is a thermopile array detecting infra-red in the 2um-22um range. It has eight thermopiles arranged in a row and can measure the absolute temperature of 8 adjacent points simultaneously. Measurements are in Celsius. It can detect a candle flame from up to 2 meters away. Other warm objects like people, a hot coffee mug, etc. can also be detected. The TPA81 module also has a servo output that can be used to pan the module and build up a thermal image. This sensor has an I2C interface. Use of this sensor requires a controller with I2C capability.

2. Specifications :
Voltage - 5 V (DC)
Current - 5mA
Temperature Range - 4°C - 100°C
Accuracy (Full FOV) - +/-2°C +/-2% from 10°C to 100°C
Accuracy (Full FOV) - +/-3°C from 4°C to 10°C
Field of View - 41° x 6° (8 pixels of approx. 5° x 6°)
Outputs - 1 ambient + 8 pixel temperatures
Communication - I2C Interface
Servo - Controls servo in 32 steps to 180° rotation
Small Size - 31mm x 18mm

3. Pictures :


4. Additional Information :
Application notes, schematics, and tech support can be found at Robot Electronics


CMPS10 - Tilt Compensated Magnetic Compass



CMPS10 - Tilt Compensated Magnetic Compass

CMPS10 - Tilt Compensated Magnetic Compass
Item No. : SS0500301
Harga: 900.000
Our 2nd generation tilt compensated compass, now better than ever with higher accuracy and lower price.
100% compatible with CMPS09 and works with all CMPS09 Examples.

1. Descriptions :
The CMPS10 module is a tilt compensated compass. Employing a 3-axis magnetometer and a 3-axis accelerometer and a powerful 16-bit processor, the CMPS10 has been designed to remove the errors caused by tilting of the PCB. The CMPS10 produces a result of 0-3599 representing 0-359.9 or 0 to 255. The output of the three sensors measuring x, y and z components of the magnetic field, together with the pitch and roll are used to calculate the bearing, each of these components are also made available in there raw form. We have also written examples of using the CMPS10 module with a wide range of popular controllers. The CMPS10 module requires a power supply at  3.3 - 5v and draws a nominal 25mA of current. There are three ways of getting the bearing from the module. A serial interface, an I2C interface or a PWM output.

2. Specifications :
Voltage - 3.3v-5v only required
Current - 25mA Typ.
Resolution - 0.1 Degree
Accuracy - Horizontal, typically 0.5%
Accuracy - Tilted to +/- 60 degrees, typically 1%
Output 1 - I2C Interface, SMBUS compatible, 0-255 and 0-3599 , 100khz
Output 2 - Serial port, 9600 baud, no parity, 2 stop bits and 3.3v-5v signal levels
Output 3 - Timing Pulse 1mS to 37mS in 0.1mS increments
Small Size - 24mm x 18mm
3. Additional Informations :
Full Technical Data, and the Compass FAQ

CMPS03 - Magnetic Compass


CMPS03 - Magnetic Compass

CMPS03 - Magnetic Compass
Item No. : SS0500101
Harga; 775.000

1. Descriptions :
This compass module has been specifically designed for use in robots as an aid to navigation. The aim was to produce a unique number to represent the direction the robot is facing. The compass uses the Philips KMZ51 magnetic field sensor, which is sensitive enough to detect the Earths magnetic field. The output from two of them mounted at right angles to each other is used to compute the direction of the horizontal component of the Earths magnetic field. We have examples of using the Compass module with a wide range of popular controllers.

2. Spesifications :
Voltage - 5v only required
Current - 25mA Typ.
Resolution - 0.1 Degree
Accuracy - 3-4 degrees approx. after calibration
Output 1 - Timing Pulse 1mS to 37mS in 0.1mS increments
Output 2 - I2C Interface, SMBUS compatible, 0-255 and 0-3599 , SCL speed up to 1MHz
Small Size - 32mm x 35mm
Low Cost - Best Price Compass Module Available

3. Pictures :


4. Additional Informations :
(i) We have examples of using the Compass module with a wide range of popular controllers.
(ii) There is also an FAQ on the compass module which contains further useful information.
(iii) Additional application notes, schematics, and tech support can be found at Robot Electronics


5. Wiring to using

WATER LEVEL CONTROL (WLC)

 Water Level Control (WLC) with Probe

WATER LEVEL CONTROL (WLC)
Item No. : SS0300601
Harga: 300.000

1. Descriptions :
This product is solution for your automatic water tank storage in home/ any water storage that needed for automatic controlled, when tank is filled and while water tank used until some level and go back to filled. For longest life time using, when once installed, it will helping for many years.

2. Features :
  • This kit comes with : Probe (stainless steel, well grade) and Water Level Control (WLC)

  • Easy to install the probe, just make small hole on top side water tank see installation manual
  • Easy to install the Water Level Control (WLC), just plug your water pump electric plug into WLC (see picture below) and WLC plug to AC electric socket.

  • Used with telephone cable (up to 500meters), 3 pin cable (more cheap than use AC cable)
  • There is no AC Voltage used, just DC (very small mili Ampere)
  • Not use mechanical limit switch, but Solid State Relay (SSR), so leak free and can operate until thousand times in one day.
3. Download installation manual : click here

OLD ways to control water level :
See picture below and here for starting explanation :
(a) The old system doesn't capture lowest level but only for higher level, motor will run and stop suddenly for every single water level dropped and there is no safety level which water level still okay without starting the water pump. If motor is not strong enough, it will burn motor inside the water pump.

(b) The modern way there is use both level sensor (higher level sensor and lowest level sensor), but it use mechanical limit switch inside the part, so it not make long life using the sensor, see picture below. But it's danger also, because there is AC (alternating current) inside the sensor, it will be dangerous also for human safety.

SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger

SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger

SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger
Item No. : SS0400701
Harga: 790.000

1. Specifications :
Voltage - 5v only required
Current - 15mA Typ. 3mA Standby.
Frequency - 40KHz
Range - 6cm - 6m.
Max Analogue Gain - Variable 40 to 700 in 16 steps.
Connection - Standard I2C Bus.
Timing - Fully timed echo, freeing host controller of task.
Units - Range reported in uS, mm or inches.
Small Size - 32mm x 15mm x 10mm height.

This small sonar ranger from Devantech offers an amazing wide range from 3cm to 6m. The SRF10 is interfaced using the IIC bus.
Communication with the SRF10 ultrasonic rangefinder is via the I2C bus. This is available on popular controllers such as the OOPic and Stamp BS2p, as well as a wide variety of micro-controllers. To the programmer the SRF10 behaves in the same way as the ubiquitous 24xx series eeprom's, except that the I2C address is different. The default shipped address of the SRF10 is 0xE0. It can be changed by the user to any of 16 addresses E0, E2, E4, E6, E8, EA, EC, EE, F0, F2, F4, F6, F8, FA, FC or FE, therefore up to 16 sonar's can be used. We have examples of using the SRF10 module with a wide range of popular controllers.

2. Pictures :



Photo shows size of the SRF10 (smaller) compared with the SRF04 (bigger)


3. Additional Information:
(i) Additional application notes, schematics, and tech support can be found at Robot Electronics
(ii) There is more information in the sonar faq


SRF08 - High Performance Ultrasonic Range Finder

SRF08 - High Performance Ultrasonic Range Finder

SRF08 - High Performance Ultrasonic Range Finder
Item No. : SS040060101
Harga:650.000
1. Specifications :
Voltage - 5v only required
Current - 15mA Typ. 3mA Standby.
Frequency - 40KHz
Range - 3cm - 6m.
Max Analogue Gain - Variable 94 to 1025 in 32 steps.
Connection - Standard I2C Bus.
Light Sensor - Front Facing light sensor.
Timing - Fully timed echo, freeing host controller of task.
Echo - Multiple echo - keeps looking after first echo.
Units - Range reported in uS, mm or inches.
Small Size - 43mm x 20mm x 17mm height.

Communication with the SRF08 ultrasonic rangefinder is via the I2C bus. This is available on popular controllers such as the OOPic and Stamp BS2p, as well as a wide variety of micro-controllers. To the programmer the SRF08 behaves in the same way as the ubiquitous 24xx series eeprom's, except that the I2C address is different. The default shipped address of the SRF08 is 0xE0. It can be changed by the user to any of 16 addresses E0, E2, E4, E6, E8, EA, EC, EE, F0, F2, F4, F6, F8, FA, FC or FE, therefore up to 16 sonar's can be used. In addition to the above addresses, all sonar's on the I2C bus will respond to address 0 - the General Broadcast address. This means that writing a ranging command to I2C address 0 (0x00) will start all sonar's ranging at the same time. This should be useful in ANN Mode (See below). The results must be read individually from each sonar's real address. We have examples of using the SRF08 module with a wide range of popular controllers.

2. Pictures :



3. Additional Information:
(i) Additional application notes, schematics, and tech support can be found at Robot Electronics.
(ii) There is more information in the sonar faq


SRF05 - Low cost Ultrasonic Ranger


SRF05 - Low cost Ultrasonic Ranger

SRF05 - Low cost Ultrasonic Ranger
Item No. : SS0400401
Harga: 490.000

1. Specifications :
Power - 5v, 4mA Typ.
Frequency - 40KHz.
Size - 43mm x 20mm x 17mm height.
Two operational modes are available, Single pin for trig/echo or 2 Pin SRF04 compatible.
The input Trigger is a 10uS Min. TTL level pulse
Echo Pulse is Positive TTL level signal, with the width proportional to the object range.
The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is fully compatible with the SRF04. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05 to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05 operates with separate trigger and echo pins, like the SRF04. The SRF05 includes a small delay before the echo pulse to give slower controllers such as the Basic Stamp and Picaxe time to execute their pulse in commands.

2. Pictures :


3. Additional Information:
(i) Additional application notes, schematics, and tech support can be found at Robot Electronics.
(ii) There is more information in the sonar faq


SRF04 - Original Ultrasonic Ranger

SRF04 - Original Ultrasonic Ranger

SRF04 - Original Ultrasonic Ranger
Item No. : SS0400501
Harga: 450.000

1. Specifications :
Range - 3cm to 3m
Power - 5v, 30mA Typ.
Frequency - 40KHz.
Size - 43mm x 20mm x 17mm height.
The input Trigger is a 10uS Min. TTL level pulse
Echo Pulse is Positive TTL level signal, with the width proportional to the object range.

This is a fantastic ultrasonic ranger that has an approximate range of 3" to 10'. This ranger has a logic line used to trigger a pulse and the echo is returned on a second line. Minimal power requirements and a compact, self contained design make this one of our most popular detectors.
This high performance ultrasonic range finder is compact and measures an amazingly wide range from 3cm to 3m. This ranger is a perfect for your robot, or any other projects requiring accurate ranging information. This sensor connects to the digital I/O lines of your microcontroller.

2. Pictures :



3. Additional Information:
(i) Additional application notes, schematics, and tech support can be found at Robot Electronics.
(ii) Here is the schematic, You can download a better quality pdf (161k) version srf1.pdf
(iii) Download the source code and a ready assembled hex file
(iv) There is more information in the sonar faq


D-Sonar Delta Sonar Range Finder


D-Sonar Delta Sonar Range Finder

D-Sonar Delta Sonar Range Finder
Item No. : SS0400301

Harga: 275.000

1. Specification :

- Distance of maximum 3 meters
- Accessible to the balance and trigger protocol UART
- LED indicator object
- Data can be requested in the period and distance info
- Through hole PCB

2. Inside kit :
- Module D-Sonar
- User Manual